Morley PWV Pro Series Optical Wah / Volume
Morley PWV Pro Series Optical Wah / Volume
- 1000+ 5-star reviews
- Three months warranty
- Free shipping on €75+ in NL
Volume pedal when switch off, wah pedal when switch is engaged.
OPERATION
The Volume Mode has been specially designed for gradual volume increases as the pedal is moved from off (toe up) to mid-travel (halfway between toe up and toe down). From mid -travel to full on (toe down) the volume increases faster. This audio taper combination gives you majestic volume swells - great for pedal steel effects - when using the full pedal travel (toe up or toe down) or subtle volume change with slight pedal movement. The pedal should be plugged into your signal chain directly after your instrument and before devices that add gain (such as preamps, distortion and overdrive effects). Plugging into the pedal after these type of effects may result in unwanted volume in the “off” position. NOTE: How fast you move the pedal affects how the volume increases. The slower you move the pedal, the smoother the volume increases.
The WAH mode is activated by pushing the WAH switch (a red LED will light when it’s “on”) . With this new series, we’ve maintained the full, thick sound and wide bandwidth of previous Morley WAH pedals and added more reactive sound. Now you can make your guitar talk or sing similar to the sounds of Hendrix, Clapton and other greats of the 60’s and early 70’s.
FEATURES
· WAH level Control: This knob controls the overall output level of the WAH effect. It does not change the wah sweep or range
· WAH On/Off Switch: This switch turns the WAH effect “on” or “off”. In the “off” mode, the pedal functions as a volume pedal.
· Electro-Optical: The amount of light from the LED (Light Emitting Diode) that shines on the LDR (Light Dependent Resistor) is controlled by a shutter placed between the two devices. Our unique electro-optical design ensures smooth overall control of the WAH without unwanted noise typical with potentiometer (pot) controlled
pedals.
· LED WAH On/Off Indicator: A red LED located above the WAH switch serves as on
on/off indicator. When the LED is on, WAH is engaged. When the LED is off, the pedal functions as a volume pedal.
Share
- Choosing a selection results in a full page refresh.
- Opens in a new window.